aluminum electrolytic capacitors (smd type) surface mount type series: fk type: v endurance105 2000 h to 5000 h low impedance40 % to 60 % less than fc series miniaturized (30 % to 50 % less than fc series) vibration-proof product (30g guaranteed) is available upon request6.3 Q rohs compliant example : 6.3 v.dc 22 f, 6.3 v.dc 3300 f marking color : black Q 10 R 12.5 unitmm ?the dimensions of the vibration-proof products, please refer to the page of the mounting specification. features specifications category temp. range C55 to +105 rated voltage range 6.3 v.dc to 100 v.dc characteristics at low temperature rated voltage (v.dc) z (C25 ) / z (+20 ) z (C40 ) / z (+20 ) z (C55 ) / z (+20 ) 6.3 2 2 capacitance tolerance 20 % (120 hz / +20 ) leakage current i Q 0.01 cv or 3 (a) after 2 minutes (whichever is greater) dissipation factor (tan ) please see the attached characteristics list capacitance range 3.3 f to 6800 f 2 after storage for 1000 hours at +105 2 with no voltage applied and th en being stabilized at +20 , capacitors shall meet the limits specifi ed in endurance. within the initial limit endurance after applying rated working voltage for 2000 hours at +105 2 and the n being R 12.5 and suffix g in 810.2, 1010.2 are 5000 hours capacitance change within 30 % of the initial value (suffix g is 35 %) dissipation factortan ) Q 200 % of the initial limit (suffix g is 300 %) leakage current 2 2 2 2 3 3 3 3 3 3 3 3 3 3 resistance to soldering heat after reflow soldering and then being stabilized at +20 , capacitors shall meet the capacitance change within 10 % of the initial value dissipation factortan ) within the initial limit leakage current within the initial limit marking frequency (hz) correction factor 50, 60 0.70 120 0.75 1 k 0.90 dimensions 10 k 0.95 100 k to 1.00 frequency correction factor for ripple current aec-q200 1.8 0.35 +0.15 `0.20 e 8.0 0.650.1 1.8 0.35 +0.15 `0.20 d8 6.3 7.70.3 6.6 7.8 max. d 6.3 5.80.3 6.6 7.8 max. 2.6 2.6 0.650.1 2a 100 g 10.0 8.3 10.0 max. 3.4 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. should a safety concern arise regarding this product, please be su re to contact us immediately. 17-apr-19 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.900.2 3.1 0.700.2 13.5 15.0 max. 4.7 0.900.3 4.4 c 16 k 0.700.2 v 35 0.35 +0.15 80 `0.20 f 8.0 10.20.3 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 e 25 h13 12.5 13.50.5 aec-q200 compliant stabilized at +20 , capacitors shall meet the following l imits. (with voltage treatment) shelf life following limits. 10 16 25 35 50 63 3 3 (impedance ratio at 120 hz) 2 2 80 100 3 3 4 4 4 3 i w p a, b h size code d l k 1.5 0.35 0.35 +0.15 `0.20 +0.15 `0.20 1.8 0.650.1 1.0 2.2 b c 4.0 5.80.3 unitv.dc 4.3 5.5 max. 5.3 6.5 max. j 6.3 a 10 h 50 j 63 0.650.1 5.0 5.80.3 r. voltage code 0.700.3 j16 16.0 16.50.5 17.0 19.0 max. 5.5 1.200.3 6.7 0.700.3 k16 18.0 16.50.5 19.0 21.0 max. 6.7 1.200.3 6.7 0.700.3 0.3 max. d 0.5 l h a 0.2 b 0.2 w i p i 22 j fk pressure relief (10 and larger) reference size negative polarity marking ( C) capacitance ( f) series identification rated voltage code lot number k mark for lead - free products (black dot) 3300 j fk series identification rated voltage code lot number capacitance ( f) negative polarity marking ( C) downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |